Low-Profile Polymer Capacitors Under 1mm High _Industry news_ABOUT

2024-05-21 17:14:04 By admin Comments are Off

Panasonic Automotive & Industrial Systems has introduced a new low profile version of its SP-Cap range of specialty conductive polymer aluminum capacitors. Measuring just 0.9mm above the PCB, the devices (LR & SR series) are rated from 2V up to 6.3V with capacitance values of 68 to 220µF. Capacitance tolerance is ±20% (120Hz / +20 degrees C).

Recommended: IGBT Modules Rated to 450A for High-Power Industrial Applications

“Polymer capacitors present several advantages over other electrolytic devices”, explains Melanie Raimann, European Product Manager for Polymer Capacitors at Panasonic. “Thanks to their ultra-low ESR values, polymer capacitors have a low impedance near their resonance point which helps to smooth ripple voltage in power circuits. Polymer capacitors, unlike ceramic devices, suffer no capacitance drifts due to temperature changes and DC bias, so they remain stable over time. Lastly, polymer capacitors have a self-healing capability that eliminates failures due to cracking in the dielectric layer caused by electrical or mechanical stresses.”

Panasonic has also announced several other enhancements to the SP Cap devices. The company has upgraded the ripple current rating of the range, which can now handle up to 10.2Arms at 45 degrees C, two and a half times higher than previous devices. Devices are also now available with up to 25V working range and focus devices in the family now feature an extended life to 2000 hours at 105 degrees C that enables an application endurance of 10years at an ambient temperature 70 degrees C. Finally, several devices in the family will be available on smaller 500 piece reels to help with flexibility and prototyping requirements.

source: http://www.powerpulse.net/story.php?storyID=31075

Comments are closed.